Intercept water moving through saturated soil before it reaches your yard, basement, or foundation.
French drain installation in Boise is used to collect and redirect water moving through saturated soil below the surface. Idaho Drainage & Foundation Repair installs French drains for Boise and Treasure Valley homes where subsurface water is keeping soil wet, moving downhill through a property, or repeatedly collecting near the foundation.
A French drain is not the answer to every drainage problem. We first determine whether the water is moving through the soil or across the surface so the system matches the actual source
Tell us what's happening and we'll schedule your on-site evaluation.





A French drain is a gravel-filled trench containing perforated drainage pipe. Water moving through the surrounding soil enters the stone-filled trench, reaches the perforated pipe, and follows the pipe toward a planned discharge point.
The fabric and washed rock help water reach the pipe while limiting the amount of surrounding soil and sediment entering the drainage system.
The important part isn’t simply burying a perforated pipe. The drain has to be located where it can intercept the water path, and the collected water still needs somewhere appropriate to go.
Treasure Valley properties can experience subsurface drainage problems even when there hasn’t been a major storm.
Clay-influenced soils can hold moisture and slow how quickly water moves downward. Seasonal irrigation adds repeated moisture during warmer months, and sloped properties can receive water moving laterally through the soil from higher ground.
Those conditions don’t mean every Boise home needs a French drain. They mean the source and direction of the water matter.
On one property, a French drain may need to intercept moisture coming through a slope. On another, roof runoff or poor grading may be the real source and should be corrected before a subsurface drain is considered.
That’s why we diagnose the water path before choosing the system.
French drains work best for subsurface water — moisture that is moving through the ground rather than flowing visibly across the top.
A French drain may be appropriate when:
A French drain is often not the first choice when water is visibly running across a driveway, patio, walkway, or other hard surface. That type of runoff may be better captured by a catch basin or channel drain.
If your main problem is standing water across the lawn rather than a confirmed subsurface water path, start with our yard and exterior drainage services.
A French drain has to be more than a trench full of rock. The location, filtration, pipe, drainage path, discharge, and restoration all have to work together.
Our installation process generally follows five steps:
Inspect the Property and Identify the Water Path
We look at where moisture appears, how the lot is graded, nearby slopes, irrigation patterns, roof drainage, foundation conditions, and possible discharge locations.
The goal is to determine where the French drain can intercept the subsurface water before excavation begins.
2. Plan and Excavate the Drain Path
We lay out the trench around the water problem and the available outlet.
Trench depth and layout depend on the property and what water path the system is intended to intercept rather than using the same dimensions on every project.
3. Install Filtration Fabric
The trench is lined with geotextile fabric to help separate surrounding soil from the drain rock.
That filtration matters in fine or clay-influenced soils because sediment entering the aggregate can reduce the open space water needs to move through the drain.
4. Install Drain Rock and Pipe
Washed drain rock and drainage pipe create a controlled path for collected subsurface water.
The pipe then carries the water toward the planned outlet or into another drainage component when the property requires a combined system.
5. Restore the Work Area
After the drainage system is installed and the trench is backfilled, we restore disturbed areas as the project scope allows.
Where feasible, that may include reinstalling sod and correcting the finish grade around the trench.
One of the most common drainage mistakes is using a system designed for one type of water to solve another.
Here’s the basic difference:
For concentrated surface pooling, see catch basin installation.
For water crossing a driveway, patio, or other hard surface, see channel drains.
For a broader look at all available water-control options, see Drainage Services.
Yes, when subsurface water is actually moving toward the foundation.
A correctly located French drain can intercept that moisture and redirect it before it continues toward the structure. That can reduce prolonged saturation in the soil immediately beside below-grade walls and foundation areas.
But a French drain should not automatically be installed simply because a basement is wet.
If water is already entering the basement, coming through the wall-floor joint, or collecting below the level where gravity drainage can remove it, an interior system or sump pump may also be needed.
See sump pump installation and repair when water has already reached an interior low point.
A French drain only works as a complete system when the collected water has an appropriate destination.
Depending on the property, the system may discharge to an approved lower outlet, connect to another drainage component, or use a different site-appropriate discharge method.
This is why outlet planning happens before installation.
A French drain that intercepts water correctly but sends it somewhere that allows it to return to the same saturated area has not solved the complete problem.
If there is no practical gravity outlet, a dry well installation or another discharge strategy may be considered when site and soil conditions support it.
French drains are simple in concept, but performance depends on the details.
Common problems with poorly planned systems include
A professional installation starts with the water problem rather than a predetermined trench location.
That matters because the most expensive French drain is one that never intercepts the water you needed it to control.
French drain pricing depends on what has to be built to intercept and move the water correctly.
Cost factors can include
A short drain installed in an open yard should not be compared directly with a larger system serving multiple sides of a home or working with other drainage components.
That’s why we provide free, scope-based estimates rather than assigning one standard price to every French drain.
Most residential French drain projects are completed in one to three days, depending on system length, excavation, access, discharge routing, and restoration.
A straightforward drain run in an accessible yard is different from a system that has to travel around structures, cross difficult terrain, tie into other drainage components, or include extensive restoration.
Before installation starts, the scope should make clear:
Where the drain will run
What areas will be excavated
How water will leave the system
What access the crew needs
What restoration is included
A buried French drain does not require constant attention, but its accessible components should still be checked periodically.
We recommend checking accessible inlets and outlets, especially before periods of heavier seasonal water.
.
Keeping the outlet open matters because even a properly installed collection system cannot move water effectively if its discharge path becomes blocked
.
FAQ
A French drain may be the right choice when soil stays saturated, water moves through a slope, or subsurface moisture repeatedly collects near your foundation. If the problem is mainly visible runoff flowing across a patio, driveway, or low point, a surface drainage system such as a catch basin or channel drain may be more appropriate.
French drains and sump pumps solve different parts of a water problem. A French drain intercepts water moving through saturated soil and redirects it before it reaches a problem area. A sump pump actively removes water that has already reached a low point, basement, or interior drainage system. Some properties need both exterior and interior water control.
French drain installation requires trenching, so some temporary lawn disruption is unavoidable. Where conditions allow, we carefully remove and reinstall sod after the drain is installed. Trench planning, backfilling, finish grading, and restoration are part of the project so the completed drainage system causes as little lasting disruption as practical.
French drain cost depends on the length and depth of the system, excavation conditions, access, materials, discharge location, disposal, and restoration. A short drain run and a system wrapping multiple sides of a home are very different projects. Idaho Drainage & Foundation Repair provides free, scope-based estimates, and every job carries a 5-year warranty.
Most residential French drain projects are completed in one to three days, depending on system length, excavation, access, discharge routing, and restoration. More complex properties may require additional work. Before installation begins, your estimate should explain the proposed drain path, work area, discharge location, expected disruption, and restoration plan.
Licensed Idaho contractor RCE-57554. Free estimates. Every job carries a 5-year warranty.
If part of your property stays saturated or water keeps moving toward your foundation, the first step is finding out whether a French drain is actually the right system.
Idaho Drainage & Foundation Repair installs French drains and related drainage systems throughout the Treasure Valley, including Boise, Meridian, Nampa, Middleton, Eagle, Star, Garden City, and Caldwell