Not sure what kind of drain you need? Start with the water problem, not the product.
Idaho Drainage & Foundation Repair provides drainage services in Boise and throughout the Treasure Valley for water problems outside, around, and inside the home. Our drainage options include yard drainage, French drains, dry wells, catch basins, channel drains, downspout routing, grading corrections, sump pump systems, and interior drainage.
You don’t need to know which system to ask for before you call. As a drainage contractor in Boise, our job is to identify where the water is coming from, how it is moving through your property, and which combination of collection, drainage, and discharge will address it.
Tell us what's happening and we'll schedule your on-site evaluation.





The first question isn’t “Which drain should we install?”
It’s “Where is the water coming from?”
We look at the property as a complete water path: where water enters the site, where it collects, whether it is moving across the surface or through the soil, and where it can safely leave the property.
That diagnosis helps determine whether you need to:
The individual system matters, but only after the water source is understood.
Yard and exterior drainage addresses water that is collecting or moving across the property before it enters the home.
It can involve several drainage methods rather than one specific product. The goal is to control exterior water by correcting how it is collected, routed, and discharged.
Right choice when: water is ponding in the yard, saturating landscaping, crossing patios or walkways, or repeatedly collecting near the house.
Wrong choice when: the main problem is water already entering below grade from beneath a basement slab or through an interior foundation drainage problem. Exterior corrections may still help, but they may not be the complete fix.
For the deeper breakdown of standing water, exterior runoff, and lawn drainage, see our Yard Drainage page:
A French drain is a subsurface drainage system designed to intercept water moving through saturated soil and give it a controlled path away from the problem area.
Unlike a surface basin, a French drain is intended primarily for water in the soil, not a large volume of water rushing across a hard surface.
Right choice when: a section of soil stays saturated, groundwater moves laterally through a slope, or subsurface moisture needs to be intercepted before it reaches a foundation or other vulnerable area.
Wrong choice when: the problem is concentrated surface runoff pouring from a driveway, patio, or downspout. That water often needs a surface collection point or solid conveyance pipe instead.
See how subsurface interception works on our French Drain Installation page:
A dry well is an underground discharge component that temporarily stores collected water and allows it to disperse into surrounding soil over time.
That makes a dry well different from a French drain. The French drain collects and conveys subsurface water. A dry well provides a destination for collected water when the property does not have a practical gravity outlet.
Right choice when: water has already been collected from downspouts or another drainage system, there is no good downhill outlet, and the property’s soil, available space, and foundation setback make underground discharge appropriate.
Wrong choice when: surrounding soil cannot accept the incoming water efficiently or the dry well would simply re-saturate the same area near the foundation. Clay-heavy properties require particular care here.
See when underground discharge makes sense on our Dry Well Installation page:
Catch basins and channel drains collect surface water before it spreads across the property.
A catch basin provides a collection point at a low area where runoff naturally gathers. A channel drain creates a longer linear collection point, making it useful where water crosses a driveway, patio, walkway, or similar hard surface.
Right choice when: you can see water moving or pooling on the surface and there is a predictable place to intercept it.
Wrong choice when: the problem is water moving through saturated soil below the surface. A surface inlet cannot solve a subsurface water problem by itself.
Once collected, the water still needs a properly planned pipe and discharge route. A basin without somewhere for the water to go is only a collection box.
Your roof can concentrate a large amount of water into a handful of downspouts. If those downspouts empty beside the foundation or into a low area, the drainage problem may begin there.
Downspout drainage uses solid pipe or another appropriate route to carry roof water away from the house to a suitable discharge point.
Right choice when: wet areas repeatedly form around downspout locations, roof runoff is flowing back toward the home, or existing extensions dump water into another problem area.
Wrong choice when: the water problem is unrelated to roof runoff. Extending a downspout will not correct groundwater, a low yard, or water rising beneath a basement.
Downspout routing is often one component of a broader exterior drainage plan, especially when multiple roof areas discharge onto a compact lot.
Grading changes the shape and slope of the ground so surface water naturally moves in a better direction.
Sometimes the simplest drainage correction is not another pipe. If the property pitches toward the house or a low spot traps surface runoff, reshaping the grade may address the source more directly.
Right choice when: surface water is following the wrong slope, settling has created a low area, or the ground directs runoff toward the foundation.
Wrong choice when: the problem is subsurface water or the site does not have enough elevation change to move water to an appropriate outlet. In those cases, grading alone may not provide enough control.
Grading is frequently combined with collection or conveyance systems when reshaping the surface can improve the water path but cannot complete it by itself.
Exterior drainage tries to manage water before it reaches the structure. Interior drainage becomes important when water is already getting inside or collecting at a point too low for gravity drainage.
An interior drainage system collects seepage or groundwater at the foundation or slab level and routes it to a sump basin. The sump pump then actively pushes that water through a discharge line and away from the structure.
Right choice when: water is entering a basement, collecting at the wall-floor joint, rising beneath a slab, or reaching an interior low point that does not have a usable gravity outlet.
Wrong choice when: the only problem is exterior surface runoff that can be intercepted and redirected before it reaches the house. A pump should not replace a straightforward exterior correction when the water can reasonably be controlled earlier.
If water is already entering below grade, see our Sump Pump Systems and Basement Waterproofing services. Basement waterproofing details are available at:
👉 Water outside and water inside may be part of the same problem. Call (208) 803-8828 and we’ll help identify where the correction needs to start.
Use the water symptom as the starting point. The final recommendation still depends on the property, but these are the basic problem-to-solution matches:
The system name is secondary. The important part is matching the system to the source, location, elevation, and destination of the water.
Boise drainage systems have to work through very different moisture conditions over the course of a year.
Clay-influenced soils can release water slowly, so a property may remain wet after the visible source has stopped. That changes where subsurface collection is useful and makes discharge planning more important.
Irrigation season adds another variable. A yard can develop recurring moisture problems during long stretches without significant rainfall because sprinklers, neighboring irrigation, and seasonal groundwater conditions continue adding water to the surrounding soil.
Properties near the Foothills have a different challenge. Elevation can move runoff toward lower portions of a lot quickly, which means collection points need to be located where the water actually arrives rather than where the resulting puddle happens to appear.
Winter creates another design constraint. Pipes and outlets that perform well during warm weather still need a discharge strategy that accounts for freezing temperatures and freeze-thaw cycles.
There isn’t one “Boise drain” that works for every property. Local conditions affect which system makes sense and how the pieces need to work together.
A useful drainage estimate should explain the plan, not just list materials.
Before you compare bids, you should be able to understand:
Price matters, but two drainage bids aren’t equivalent if one controls the complete water path and the other only addresses the most visible symptom.
A clear estimate should make it possible to see that difference.
FAQ
Licensed Idaho contractor RCE-57554. Free estimates. Every job carries a 5-year warranty.
You don’t need to diagnose the system before you call. Tell us where you’re seeing water, when it happens, and what parts of the property are affected. We’ll evaluate the water path and explain which drainage options fit the problem.
Idaho Drainage & Foundation Repair provides drainage services throughout the Treasure Valley, including Boise, Meridian, Nampa, Middleton, Eagle, Star, Garden City, and Caldwell.