Raise sunken driveways, sidewalks, patios and other concrete slabs without automatically tearing them out and replacing them.
Idaho Drainage and Foundation Repair provides polyurethane concrete leveling in Boise and throughout the Treasure Valley using professional concrete-raising equipment and polyurethane materials from HMI.
If the existing slab is still a good candidate for repair, polyurethane lifting can fill void space beneath the concrete and raise settled sections toward the intended elevation.
Before recommending a lift, we look at the condition of the slab, how it has settled, surrounding elevations, support beneath the concrete, and any drainage conditions that may be contributing to the problem.
Tell us what's happening and we'll schedule your on-site evaluation.





Polyurethane concrete leveling—also called concrete lifting, concrete raising, or polyjacking—is a method of repositioning settled concrete from beneath the slab.
Small injection holes are drilled through the concrete. Polyurethane material is injected through those access points as a liquid.
As the material reacts and expands beneath the slab, it fills available void space and creates lifting force. Material can be introduced incrementally while the technician monitors how the concrete responds.
HMI’s concrete-raising process uses dual-component polyurethane material and controlled injection for void filling and slab lifting. Its standard polyurethane process uses approximately 5/8-inch injection holes.
Once the lift is complete, the injection points are patched.
Polyurethane concrete lifting can be used on many residential slabs.
Driveway slabs can settle independently, leaving uneven joints or a drop where the driveway meets the garage.
Driveway concrete leveling can raise suitable slabs and improve those transitions without replacing the entire driveway.
One sidewalk panel may settle below the next and leave an uneven walking surface.
Sidewalk concrete leveling focuses on repositioning those settled panels when the existing concrete remains suitable for lifting.
A settled patio may develop uneven sections or change slope relative to the house, steps, or surrounding hardscape.
See patio and porch concrete leveling.
Some non-structural porch slabs can be lifted when the concrete and surrounding structure allow it.
The first slab outside a garage can settle below the garage entrance, creating an uneven transition.
Some garage floor slabs can be candidates for lifting depending on the slab condition, cracking, foundation configuration, and settlement pattern.
See garage floor concrete leveling.
HMI identifies residential driveways, sidewalks, walkways, patios, pool decks, and garage approaches among the applications for polyurethane concrete raising.
Concrete needs support beneath it.
When the conditions supporting part of a slab change, that portion of the concrete can move downward relative to surrounding slabs and structures.
There is not one universal cause.
Concrete is sometimes placed over fill material.
If the material beneath one portion of the slab compresses more than another, the slab can lose uniform support.
A gap can develop between the concrete and the material beneath it.
Loss of support beneath part of a slab can contribute to settlement.
Moving water can sometimes carry supporting material away from slab edges or surrounding areas.
Potential sources include:
Repeated changes in moisture can affect soil and fill conditions beneath or beside concrete.
Water should not automatically be blamed for a settled slab. The water path needs to match the affected area before drainage is treated as a contributing condition.
Previous excavation, fill depth, grading, landscaping, slab construction, and changes made around the property can all provide useful clues.
For a deeper explanation, see why concrete sinks.
Drainage can be part of the problem when water is changing support conditions around a slab.
That is especially worth investigating when settlement occurs near:
But proximity does not prove causation.
A downspout beside a settled driveway does not automatically mean the downspout caused the settlement.
Idaho Drainage and Foundation Repair can evaluate the concrete and the water path rather than treating them as unrelated issues.
If drainage correction is also appropriate, see Drainage Services.
Idaho Drainage and Foundation Repair uses professional concrete-raising equipment and polyurethane materials from HMI.
The polyurethane process offers several practical characteristics for residential slab lifting.
HMI’s standard polyurethane process uses approximately 5/8-inch injection holes.
That is substantially smaller than the access holes traditionally associated with mudjacking.
Polyurethane lifting material is considerably lighter than the cementitious slurry traditionally used for mudjacking.
That means the lifting process does not require placing the same amount of heavy material beneath the existing slab.
Polyurethane can be injected incrementally while the technician monitors slab movement.
This is important because the objective is not simply to force the concrete upward.
The slab needs to be repositioned relative to the surfaces and structures around it.
As the polyurethane reacts and expands, it can occupy void space beneath the slab while creating lifting force.
HMI manufactures polyurethane materials and equipment specifically for concrete-raising applications, including residential work.
We begin by looking at the concrete itself.
That includes:
The first decision is whether the existing concrete is a reasonable candidate for lifting.
A settled slab needs a reference elevation.
Depending on the project, that may be:
The objective is to improve the slab’s position relative to the surrounding property—not simply make it higher.
Small holes are drilled through the concrete at selected locations.
These provide access beneath the slab for polyurethane injection.
The dual-component material is introduced beneath the concrete as a liquid.
As the polyurethane reacts and expands, it occupies available void space and creates lifting force beneath the concrete.
The technician can introduce material incrementally and monitor the slab as it moves.
The slab is checked against the intended repair objective and surrounding fixed surfaces.
The access holes are patched after the lifting process is complete.
Concrete leveling changes the position of the slab.
It does not automatically correct a downspout, irrigation problem, grading issue, or exterior drainage path.
If water appears relevant to the settlement, that condition should be addressed separately.
A settled slab does not automatically need replacement.
But lifting is not right for every piece of concrete either.
The central question is:
Is the existing concrete still worth saving?
If it is, lifting may provide an alternative to demolition and replacement.
Both methods are used to raise settled concrete, but the materials and installation methods differ.
Traditional mudjacking pumps a heavier cementitious slurry beneath the slab.
It also typically requires larger injection holes.
Polyurethane enters beneath the slab as a liquid and expands.
HMI documents its polyurethane process as using smaller injection holes and much lighter material than traditional mudjacking, while allowing controlled injection during the lift.
Idaho Drainage and Foundation Repair uses the polyurethane method.
A settled concrete slab and a settling house foundation are not the same problem.
Generally addresses slabs such as:
Addresses structural movement involving the home or another load-bearing structure.
A structural evaluation may be more appropriate when concrete settlement appears alongside symptoms such as:
If the question is whether the structure itself is moving, start with a foundation inspection.
Sometimes replacement or another repair is more appropriate.
Concrete leveling may not be recommended when:
Concrete leveling also does not make old concrete new.
Existing cracks, stains, spalling, surface wear, finish differences, and previous repairs may remain visible after the slab has been raised.
The purpose is to correct elevation where feasible, not cosmetically resurface the concrete.
A driveway slab may drop relative to the garage entrance and create an uneven transition.
One sidewalk section may settle below the next.
Settlement may change the relationship between a patio and the home.
If that creates a water problem, both slab elevation and drainage should be evaluated.
Concrete beside landscaped areas may experience changing support conditions from several possible sources, including water and previous soil disturbance.
When settlement and concentrated roof runoff occur in the same area, the slab and water path should both be examined.
A slab may remain in usable physical condition even though support beneath part of it has changed.
Polyurethane lifting can fill underlying void space as part of the raising process when the slab is an appropriate candidate.
Properties throughout Boise and the Treasure Valley vary in:
Seasonal rain, snowmelt, irrigation, roof runoff, and dry periods can all change the amount of water around a property.
But there is no single cause of concrete settlement that applies to every Treasure Valley home.
The repair should begin with the actual slab and site conditions.
The objective is to improve the elevation and alignment of the existing concrete within the constraints of the property.
That does not mean every slab can be returned perfectly to its original position.
The achievable lift can be affected by:
The estimate should establish a realistic lift objective based on those conditions.
It can help when slab settlement itself created the low area.
For example, if part of a patio sinks and begins directing water toward the house, repositioning the slab may improve the surface path.
But standing water can also involve:
Raising one slab will not necessarily correct those larger drainage conditions.
Idaho Drainage and Foundation Repair can evaluate yard and exterior drainage services, downspout drainage extensions, or landscape grading when the water problem extends beyond the concrete.
The cost depends on the actual project.
Factors can include:
Idaho Drainage and Foundation Repair provides free estimates so the proposed repair and price can be based on the actual concrete.
Before recommending a lift, we want to understand:
What moved?
What condition is the existing concrete in?
Can the slab reasonably be repositioned?
What elevation should it meet?
Are there fixed surfaces limiting the lift?
Is water relevant to the settlement?
The evaluation may include:
The repair recommendation follows the slab and site conditions.
FAQ
Licensed Idaho contractor RCE-57554. Free estimates. Every completed job carries a 5-year warranty.
If your driveway, sidewalk, patio, walkway, porch, or garage slab has settled, the first step is determining whether the existing concrete is a good candidate for lifting.
Idaho Drainage and Foundation Repair can evaluate the slab, surrounding elevations, and any drainage conditions that may be relevant before recommending the repair.