A sunken garage floor does not automatically mean the home’s foundation is settling—or that the entire slab needs to be replaced.
When the garage floor itself has lost elevation but remains suitable for repair, polyurethane concrete lifting may be able to raise the settled slab and improve its relationship to surrounding fixed surfaces.
Idaho Drainage and Foundation Repair provides garage floor concrete leveling in Boise and throughout the Treasure Valley using polyurethane lifting technology.
The first step is determining whether the problem involves the garage slab, the structural foundation, or both.
Tell us what's happening and we'll schedule your on-site evaluation.





Garage slab settlement can show up in several ways:
These symptoms do not tell us by themselves whether polyurethane lifting is the correct repair.
The slab and surrounding structure need to be evaluated together.
This is the most important distinction on this page.
A garage floor slab is not necessarily the same thing as the structural foundation supporting the house.
If the non-structural floor slab has settled while the surrounding foundation remains stable, concrete leveling may be appropriate.
The problem may be concentrated within the slab and supporting material beneath it.
A different evaluation is needed if movement involves:
Additional symptoms such as recurring wall cracks, changing floor elevations inside the home, sticking doors, or visible foundation movement can also justify a closer structural evaluation.
Polyurethane slab lifting should not be presented as a repair for structural foundation settlement.
If the concern extends beyond the garage floor, start with a foundation inspection.
Concrete needs consistent support beneath it.
If supporting conditions change beneath one portion of a garage floor, that section can settle relative to surrounding surfaces.
Possible contributors include:
If material beneath the slab compresses unevenly, one portion of the garage floor can lose elevation.
Gaps can develop between the underside of the concrete and supporting material.
Those voids can leave portions of the slab without uniform support.
Utility work, construction activity, or other disturbance beneath or around the garage may create different support conditions.
Water can contribute to changes beneath a slab in some situations, particularly when it is moving supporting material or repeatedly affecting the same area.
Cracks and settlement can occur together, but a crack does not automatically mean a slab cannot be lifted.
A relatively intact garage slab may still be evaluated for polyurethane lifting.
The important questions include:
Concrete leveling does not erase existing cracks.
After lifting, existing:
may remain visible.
If cracking appears connected to structural movement elsewhere in the home, a foundation inspection is the better starting point.
Idaho Drainage and Foundation Repair uses an HMI polyurethane concrete lifting system for suitable settled slabs.
We begin by looking at the affected concrete and surrounding structure.
The evaluation may include:
The first decision is whether the issue is appropriate for concrete leveling.
The slab needs a realistic target elevation.
Depending on the garage, that may involve its relationship to:
The objective is to improve the settled area without creating a new elevation problem elsewhere.
Small access holes are drilled through the slab at selected locations.
HMI’s standard polyurethane concrete-raising process uses approximately 5/8-inch injection holes.
Dual-component polyurethane is injected beneath the slab as a liquid.
The polyurethane reacts and expands beneath the concrete.
As it occupies available void space, it creates lifting force.
Material can be introduced incrementally while the technician monitors how the garage floor responds.
The slab is checked against the intended repair objective and surrounding fixed surfaces.
The access holes are patched after lifting is complete.
Polyurethane lifting works beneath the existing concrete and allows suitable slabs to be repositioned without automatically removing the entire garage floor.
HMI’s standard polyurethane process uses approximately 5/8-inch injection holes.
Polyurethane lifting material is considerably lighter than the cementitious slurry traditionally used for mudjacking.
Material can be introduced incrementally while the technician monitors slab movement.
This is particularly important inside a garage, where walls, entrances, neighboring slab sections, and other fixed elevations can limit the desired lift.
Expanding polyurethane can occupy void space beneath the slab while creating lifting force.
Not every settled garage floor needs to be removed.
At the same time, not every garage slab is a good lifting candidate.
The goal is not to lift every garage floor.
It is to determine whether the existing slab is worth saving and appropriate for lifting.
Sometimes the problem is actually outside the garage.
The garage floor may remain at its original elevation while the first driveway slab settles.
That creates a drop at the garage entrance even though the interior slab has not moved.
In that situation, driveway concrete leveling may be the more appropriate service.
Other properties may have settlement affecting the interior garage slab itself.
The evaluation should identify which concrete actually moved before selecting the repair.
Sometimes slab elevation contributes to a water problem.
For example, settlement may create a low area within the garage or change the relationship between the garage floor and exterior concrete.
But water entering or collecting around a garage can also involve:
Polyurethane lifting only changes the position of the slab.
It does not automatically correct the exterior source of water.
Start by determining where the water is coming from.
If the exterior driveway has settled and directs water toward the garage, the driveway may need attention.
If surrounding grade sends runoff toward the garage, exterior drainage may be the larger issue.
If the garage floor itself has settled, its elevation may also be relevant.
Possible factors include:
Because Idaho Drainage and Foundation Repair works on both concrete leveling and drainage, we can evaluate those conditions together rather than assuming every garage water problem is caused by the slab.
Any fixed drain or similar feature needs to be considered before the slab is lifted.
Changing the elevation of surrounding concrete can change its relationship to the drain.
The repair plan should account for:
Concrete should not simply be raised without considering where surface water is intended to travel.
The goal is to improve the elevation of the settled slab within the limits of the existing garage.
That does not mean every floor can be restored perfectly to its original position.
The achievable lift may be limited by:
The estimate should establish a realistic lift objective based on those conditions.
Garage slabs throughout Boise and the Treasure Valley can have different construction and site conditions.
Relevant factors may include:
There is no single local cause that explains every sunken garage floor.
Idaho Drainage and Foundation Repair evaluates the actual slab and surrounding structure before recommending lifting.
Garage floor leveling cost depends on the repair scope.
Factors can include:
Idaho Drainage and Foundation Repair provides free estimates so pricing can be based on the actual garage floor and proposed repair.
A garage evaluation may include:
The key question is whether the problem is a liftable garage slab, a structural foundation issue, an exterior concrete problem, or a combination of conditions.
FAQ